LKW // Device Holder // Holders for Mobile phones // Apple // iPhone 4

  • Übersicht
  • Datenblatt
  • Einbauanleitung
  • Galerie
  • Fragen
For a larger view please click on the picture

Apple iPhone 4 Aktivhalter m Kugelgelenk Brod 527170 7

Art.No.: b527170
article will be ordered for you
112,20 € incl. VAT, plus Shipping
(Weight: 0.077 kg)
Apple iPhone 4 Aktivhalter m Kugelgelenk Brod 527170 7

Brodit Active holder for fixed installation.


Brodit Item No: 527170

KUDA Item No: b527170

Brodit EAN Code: 7320285271708

Description: With tilt swivel. 2A charger. For a more secure upright and horizontal position. Padded.

Product info: The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! Use an active holder for your iPhone on the road and you will always have a freshly charged battery. The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is equipped with an Apple approved cable. When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction and turn it 360. Attach onto ProClip Mounting Platform.

Category: Mobilephones

Instructions: Please read all of the instructions and look at the pictures before attaching the holder. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse holder and fuse inline with the Red wire close to the power source. Route the cable from the holder into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted. 3. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the device forward and in the same time slide the device downward into place in the holder. To remove the device from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the holder. 4. The holder is in place.


Brodit Active holder for fixed installation.


Brodit Item No: 527170

KUDA Item No: b527170

Brodit EAN Code: 7320285271708

Description: With tilt swivel. 2A charger. For a more secure upright and horizontal position. Padded.

Product info: The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! Use an active holder for your iPhone on the road and you will always have a freshly charged battery. The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is equipped with an Apple approved cable. When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction and turn it 360. Attach onto ProClip Mounting Platform.

Category: Mobilephones

Instructions: Please read all of the instructions and look at the pictures before attaching the holder. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse holder and fuse inline with the Red wire close to the power source. Route the cable from the holder into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted. 3. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the device forward and in the same time slide the device downward into place in the holder. To remove the device from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the holder. 4. The holder is in place.

Apple iPhone 4 Aktivhalter m Kugelgelenk Brod 527170 7

Apple iPhone 4 Aktivhalter m Kugelgelenk Brod 527170 7

Art.No.: b527170
No instructions provided.

Sie haben Fragen zu diesem Artikel?

[?] Questions about this product?